Lesson Five - Tech
Technical Assistant
Everyone will be a technical assistant at ARTC. Because we usually have to set up and take down temporary performance stages in between other acts or on a tight schedule, we need all hands on deck. Below is a description of our equipment along with how we use it and important tips.
Your job as a technical assistant is to know what these things are and to do whatever the people who are in charge of set up tell you to do with them.
IMPORTANT NOTE: FOR ALL ITEMS, DO NOT TURN ON THE POWER UNTIL EVERYTHING IS CONNECTED AND ZEROED OUT
EQUIPMENT:
Cables:
SOUND CABLES - Male tends to be input / Female tends to be output
SOUND CABLES - Male tends to be input / Female tends to be output
XLR - Most often used to connect from mics into the mixer (whether using the snake or not). Also from the mixer to the amp
Quarter inch - Most often used to carry signal into the mixer from a keyboard or submixer or into a direct box. Also usually into the speakers.
Quarter inch mono - one line
Quarter inch stereo - two lines
Eighth inch, also called phono mini or headphone jack. Eighth inch mono - one line; eighth inch stereo - two lines
RCA pinplug (or just RCA) - Often the inputs into a mixer. Go from the Show Cue Systems computer to the submixer. CD player (if any) into mixer
Banana plug - Carry power from amplifiers. Many amps will use banana plugs and quarter inch mono
Snake:
Snakes - Combine XLR inputs and outputs into one cable for organization and ease of use.
Snakes - Combine XLR inputs and outputs into one cable for organization and ease of use.
Power cables
Extension cords. Female tends to be input, male tends to be output. Come in grounded and ungrounded varieties. Do not use an ungrounded (2-prong) extension cord. Also called "Edison"
Active surge protector. Actively condition the power and may have battery backup
Passive surge protectors. Your run of the mill power strip. When plugging a power strip into another power strip (which should be avoided in any case), use the top outlet to leave room at the bottom for a larger transformer.
IEC3 aka IBM or Zip Cable. The power cords that go directly into devices such as a mixer or amplifier.
Light cables
Computer connectors
How to wrap cables:
(video) - over under
Wrapping the cables correctly helps them to all lay flat and come up easily.
Microphones (mics)
Shure Beta 87a - 87s feed back less and are more precise for vocals. These take Phantom Power. Phantom Power mics use an electromagnet rather than a standard magnet and therefore must recieve a continuous 48V supply of power. This supply comes from the board. Phantom Power should not be sent to any device that doesn't require it if at all possible.
Shure SM58 - The world's standard microphone. Everyone knows how to engineer and use them and they are VERY durable.
Shure SM27 - A large diaphragm studio condenser mic. We use them for choirs and crowd scenes. Anything with lots of voices on one mic. You can choose what pattern they are (see next image).
Microphone pickup patterns
Shure Beta52a - Kick mic. Huge diaphragm mic. Usually used for floor sounds in Foley. Very good for low registers.
Audio Technica - AT 8035. Shotgun mics. Usually used in Foley. Extremely directional (Super Cardioid). Imagine a cone coming out of the bottom of the mic. Any sound you want picked up must happen in that cone.
AKG C214 - What we use in the studio. The large diaphragm and the very high quality captures all the nuances of the voices. You can also set the pattern for a crowd or an individual.
Wireless mics
- We occasionally borrow wireless mics. They do not require phantom power, although they do require batteries and receivers which plug into the board.
- We occasionally have folks that bring in their own supplies which may not be covered here.
Speakers
Sonic SM-12 - 2-way 12 inch speakers. ARTC owned and most often used if the house doesn't provide them. Passive speakers.
JBL EON - Active 2-way speaker. Take unamplified signal by XLR or quarter inch.
Amplifiers
Amps can also be built into the sound board on some occasions. Electro-Voice 7100. Takes XLR in and sends banana plug signal out.
Mackie M-1400I. Has both XLR and quarter inch inputs and banana plug and quarter inch outputs. It's a big honkin' beast made for big honkin' rooms.
Mixers
Front of House mixers - the bosses
Soundcraft SI Impact. Fully digital mixer. Needs an amp, but does not need the rack mount extras. Outputs to a computer via USB
Mackie Onyx 1640. Requires the rack mount extras. All analog in, but has both analog and digital out. Needs an amp. Output to a computer via Firewire.
Yamaha EMX 5000. All analog mixer. Has a built-in amp, so unless you're doing a huge room you don't need one. Does not need the rack mount extras.
Submixers
Mackie Pro FX8 - Normally used as a Foley submixer, but isn't often used at all anymore (2026). All analog XLR or quarter inch in or out. Normally runs to the main mixer so there is no amp. Does require its own power via Zip cord. Can provide phantom power to all mic channels.
Mackie DFX 6. All analog XLR or quarter inch in or out. Connects to the main mixer so there is no amp. Does require its own power via Zip cord. Can provide optional phantom power to all mic channels. Typically used with the Show Cue Systems laptop using an external sound card which allows the SCS project to send multiple channels for easier mixing.
